init

1 files changed, 253 insertions, 0 deletions

diff --git a/.suckless/st/FAQ b/.suckless/st/FAQ
new file mode 100644
index 0000000..6287a27
--- /dev/null
+++ b/.suckless/st/FAQ
@@ -0,0 +1,253 @@
+## Why does st not handle utmp entries?
+
+Use the excellent tool of [utmp](https://git.suckless.org/utmp/) for this task.
+
+
+## Some _random program_ complains that st is unknown/not recognised/unsupported/whatever!
+
+It means that st doesn’t have any terminfo entry on your system. Chances are
+you did not `make install`. If you just want to test it without installing it,
+you can manually run `tic -sx st.info`.
+
+
+## Nothing works, and nothing is said about an unknown terminal!
+
+* Some programs just assume they’re running in xterm i.e. they don’t rely on
+  terminfo. What you see is the current state of the “xterm compliance”.
+* Some programs don’t complain about the lacking st description and default to
+  another terminal. In that case see the question about terminfo.
+
+
+## How do I scroll back up?
+
+* Using a terminal multiplexer.
+	* `st -e tmux` using C-b [
+	* `st -e screen` using C-a ESC
+* Using the excellent tool of [scroll](https://git.suckless.org/scroll/).
+* Using the scrollback [patch](https://st.suckless.org/patches/scrollback/).
+
+
+## I would like to have utmp and/or scroll functionality by default
+
+You can add the absolute path of both programs in your config.h file. You only
+have to modify the value of utmp and scroll variables.
+
+
+## Why doesn't the Del key work in some programs?
+
+Taken from the terminfo manpage:
+
+	If the terminal has a keypad that transmits codes when the keys
+	are pressed, this information can be given. Note that it is not
+	possible to handle terminals where the keypad only works in
+	local (this applies, for example, to the unshifted HP 2621 keys).
+	If the keypad can be set to transmit or not transmit, give these
+	codes as smkx and rmkx. Otherwise the keypad is assumed to
+	always transmit.
+
+In the st case smkx=E[?1hE= and rmkx=E[?1lE>, so it is mandatory that
+applications which want to test against keypad keys send these
+sequences.
+
+But buggy applications (like bash and irssi, for example) don't do this. A fast
+solution for them is to use the following command:
+
+	$ printf '\033[?1h\033=' >/dev/tty
+
+or
+	$ tput smkx
+
+In the case of bash, readline is used. Readline has a different note in its
+manpage about this issue:
+
+	enable-keypad (Off)
+		When set to On, readline will try to enable the
+		application keypad when it is called. Some systems
+		need this to enable arrow keys.
+
+Adding this option to your .inputrc will fix the keypad problem for all
+applications using readline.
+
+If you are using zsh, then read the zsh FAQ
+<http://zsh.sourceforge.net/FAQ/zshfaq03.html#l25>:
+
+	It should be noted that the O / [ confusion can occur with other keys
+	such as Home and End. Some systems let you query the key sequences
+	sent by these keys from the system's terminal database, terminfo.
+	Unfortunately, the key sequences given there typically apply to the
+	mode that is not the one zsh uses by default (it's the "application"
+	mode rather than the "raw" mode). Explaining the use of terminfo is
+	outside of the scope of this FAQ, but if you wish to use the key
+	sequences given there you can tell the line editor to turn on
+	"application" mode when it starts and turn it off when it stops:
+
+		function zle-line-init () { echoti smkx }
+		function zle-line-finish () { echoti rmkx }
+		zle -N zle-line-init
+		zle -N zle-line-finish
+
+Putting these lines into your .zshrc will fix the problems.
+
+
+## How can I use meta in 8bit mode?
+
+St supports meta in 8bit mode, but the default terminfo entry doesn't
+use this capability. If you want it, you have to use the 'st-meta' value
+in TERM.
+
+
+## I cannot compile st in OpenBSD
+
+OpenBSD lacks librt, despite it being mandatory in POSIX
+<http://pubs.opengroup.org/onlinepubs/9699919799/utilities/c99.html#tag_20_11_13>.
+If you want to compile st for OpenBSD you have to remove -lrt from config.mk, and
+st will compile without any loss of functionality, because all the functions are
+included in libc on this platform.
+
+
+## The Backspace Case
+
+St is emulating the Linux way of handling backspace being delete and delete being
+backspace.
+
+This is an issue that was discussed in suckless mailing list
+<https://lists.suckless.org/dev/1404/20697.html>. Here is why some old grumpy
+terminal users wants its backspace to be how he feels it:
+
+	Well, I am going to comment why I want to change the behaviour
+	of this key. When ASCII was defined in 1968, communication
+	with computers was done using punched cards, or hardcopy
+	terminals (basically a typewriter machine connected with the
+	computer using a serial port).  ASCII defines DELETE as 7F,
+	because, in punched-card terms, it means all the holes of the
+	card punched; it is thus a kind of 'physical delete'. In the
+	same way, the BACKSPACE key was a non-destructive backspace,
+	as on a typewriter.  So, if you wanted to delete a character,
+	you had to BACKSPACE and then DELETE.  Another use of BACKSPACE
+	was to type accented characters, for example 'a BACKSPACE `'.
+	The VT100 had no BACKSPACE key; it was generated using the
+	CONTROL key as another control character (CONTROL key sets to
+	0 b7 b6 b5, so it converts H (code 0x48) into BACKSPACE (code
+	0x08)), but it had a DELETE key in a similar position where
+	the BACKSPACE key is located today on common PC keyboards.
+	All the terminal emulators emulated the difference between
+	these keys correctly: the backspace key generated a BACKSPACE
+	(^H) and delete key generated a DELETE (^?).
+
+	But a problem arose when Linus Torvalds wrote Linux. Unlike
+	earlier terminals, the Linux virtual terminal (the terminal
+	emulator integrated in the kernel) returned a DELETE when
+	backspace was pressed, due to the VT100 having a DELETE key in
+	the same position.  This created a lot of problems (see [1]
+	and [2]). Since Linux has become the king, a lot of terminal
+	emulators today generate a DELETE when the backspace key is
+	pressed in order to avoid problems with Linux. The result is
+	that the only way of generating a BACKSPACE on these systems
+	is by using CONTROL + H. (I also think that emacs had an
+	important point here because the CONTROL + H prefix is used
+	in emacs in some commands (help commands).)
+
+	From point of view of the kernel, you can change the key
+	for deleting a previous character with stty erase. When you
+	connect a real terminal into a machine you describe the type
+	of terminal, so getty configures the correct value of stty
+	erase for this terminal. In the case of terminal emulators,
+	however, you don't have any getty that can set the correct
+	value of stty erase, so you always get the default value.
+	For this reason, it is necessary to add 'stty erase ^H' to your
+	profile if you have changed the value of the backspace key.
+	Of course, another solution is for st itself to modify the
+	value of stty erase.  I usually have the inverse problem:
+	when I connect to non-Unix machines, I have to press CONTROL +
+	h to get a BACKSPACE. The inverse problem occurs when a user
+	connects to my Unix machines from a different system with a
+	correct backspace key.
+
+	[1] http://www.ibb.net/~anne/keyboard.html
+	[2] http://www.tldp.org/HOWTO/Keyboard-and-Console-HOWTO-5.html
+
+
+## But I really want the old grumpy behaviour of my terminal
+
+Apply [1].
+
+[1] https://st.suckless.org/patches/delkey
+
+
+## Why do images not work in st using the w3m image hack?
+
+w3mimg uses a hack that draws an image on top of the terminal emulator Drawable
+window. The hack relies on the terminal to use a single buffer to draw its
+contents directly.
+
+st uses double-buffered drawing so the image is quickly replaced and may show a
+short flicker effect.
+
+Below is a patch example to change st double-buffering to a single Drawable
+buffer.
+
+diff --git a/x.c b/x.c
+--- a/x.c
++++ b/x.c
+@@ -732,10 +732,6 @@ xresize(int col, int row)
+ 	win.tw = col * win.cw;
+ 	win.th = row * win.ch;
+ 
+-	XFreePixmap(xw.dpy, xw.buf);
+-	xw.buf = XCreatePixmap(xw.dpy, xw.win, win.w, win.h,
+-			DefaultDepth(xw.dpy, xw.scr));
+-	XftDrawChange(xw.draw, xw.buf);
+ 	xclear(0, 0, win.w, win.h);
+ 
+ 	/* resize to new width */
+@@ -1148,8 +1144,7 @@ xinit(int cols, int rows)
+ 	gcvalues.graphics_exposures = False;
+ 	dc.gc = XCreateGC(xw.dpy, parent, GCGraphicsExposures,
+ 			&gcvalues);
+-	xw.buf = XCreatePixmap(xw.dpy, xw.win, win.w, win.h,
+-			DefaultDepth(xw.dpy, xw.scr));
++	xw.buf = xw.win;
+ 	XSetForeground(xw.dpy, dc.gc, dc.col[defaultbg].pixel);
+ 	XFillRectangle(xw.dpy, xw.buf, dc.gc, 0, 0, win.w, win.h);
+ 
+@@ -1632,8 +1627,6 @@ xdrawline(Line line, int x1, int y1, int x2)
+ void
+ xfinishdraw(void)
+ {
+-	XCopyArea(xw.dpy, xw.buf, xw.win, dc.gc, 0, 0, win.w,
+-			win.h, 0, 0);
+ 	XSetForeground(xw.dpy, dc.gc,
+ 			dc.col[IS_SET(MODE_REVERSE)?
+ 				defaultfg : defaultbg].pixel);
+
+
+## BadLength X error in Xft when trying to render emoji
+
+Xft makes st crash when rendering color emojis with the following error:
+
+"X Error of failed request:  BadLength (poly request too large or internal Xlib length error)"
+  Major opcode of failed request:  139 (RENDER)
+  Minor opcode of failed request:  20 (RenderAddGlyphs)
+  Serial number of failed request: 1595
+  Current serial number in output stream:  1818"
+
+This is a known bug in Xft (not st) which happens on some platforms and
+combination of particular fonts and fontconfig settings.
+
+See also:
+https://gitlab.freedesktop.org/xorg/lib/libxft/issues/6
+https://bugs.freedesktop.org/show_bug.cgi?id=107534
+https://bugzilla.redhat.com/show_bug.cgi?id=1498269
+
+The solution is to remove color emoji fonts or disable this in the fontconfig
+XML configuration.  As an ugly workaround (which may work only on newer
+fontconfig versions (FC_COLOR)), the following code can be used to mask color
+fonts:
+
+	FcPatternAddBool(fcpattern, FC_COLOR, FcFalse);
+
+Please don't bother reporting this bug to st, but notify the upstream Xft
+developers about fixing this bug.
+
+As of 2022-09-05 this now seems to be finally fixed in libXft 2.3.5:
+https://gitlab.freedesktop.org/xorg/lib/libxft/-/blob/libXft-2.3.5/NEWS